dmesg - 2012-04-26 15:55
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-38-generic (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #83-Ubuntu SMP Wed Jan 4 11:12:07 UTC 2012 (Ubuntu 2.6.32-38.83-generic 2.6.32.52+drm33.21)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000cf679000 (usable)
BIOS-e820: 00000000cf679000 - 00000000cf68f000 (reserved)
BIOS-e820: 00000000cf68f000 - 00000000cf6ce000 (ACPI data)
BIOS-e820: 00000000cf6ce000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000430000000 (usable)
DMI 2.6 present.
last_pfn = 0x430000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-EBFFF uncachable
EC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 base 0080000000 mask FFC0000000 write-back
2 base 00C0000000 mask FFF0000000 write-back
3 base 0100000000 mask FF00000000 write-back
4 base 0200000000 mask FE00000000 write-back
5 base 0400000000 mask FFE0000000 write-back
6 base 0420000000 mask FFF0000000 write-back
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0xcf679 max_arch_pfn = 0x400000000
e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000001000 (usable)
modified: 0000000000001000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 00000000000a0000 (usable)
modified: 0000000000100000 - 00000000cf679000 (usable)
modified: 00000000cf679000 - 00000000cf68f000 (reserved)
modified: 00000000cf68f000 - 00000000cf6ce000 (ACPI data)
modified: 00000000cf6ce000 - 00000000d0000000 (reserved)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000fe000000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000430000000 (usable)
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000cf679000
NX (Execute Disable) protection: active
0000000000 - 00c0000000 page 1G
00c0000000 - 00cf600000 page 2M
00cf600000 - 00cf679000 page 4k
kernel direct mapping tables up to cf679000 @ 8000-b000
init_memory_mapping: 0000000100000000-0000000430000000
NX (Execute Disable) protection: active
0100000000 - 0400000000 page 1G
0400000000 - 0430000000 page 2M
kernel direct mapping tables up to 430000000 @ a000-c000
RAMDISK: 377f3000 - 37fef3bd
ACPI: RSDP 00000000000f0cd0 00024 (v02 DELL )
ACPI: XSDT 00000000000f0dd4 0009C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 00000000cf6b3f9c 000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 00000000cf68f000 03D5A (v01 DELL PE_SC3 00000001 INTL 20050624)
ACPI: FACS 00000000cf6b6000 00040
ACPI: APIC 00000000cf6b3478 0015E (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 00000000cf6b35d8 00050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 00000000cf6b362c 00038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DMAR 00000000cf6b3668 00198 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 00000000cf6b38c4 0003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 00000000cf6b3904 00134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 00000000cf6b3a3c 00024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 00000000cf692edc 00270 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 00000000cf69314c 003A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 00000000cf692d5c 00030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 00000000cf692d8c 00150 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SRAT 00000000cf6b3bc0 00370 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 00000000cf6b3f34 00064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SSDT 00000000cf6b7000 043F4 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 1 -> APIC 32 -> Node 0
SRAT: PXM 2 -> APIC 0 -> Node 1
SRAT: PXM 1 -> APIC 34 -> Node 0
SRAT: PXM 2 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 50 -> Node 0
SRAT: PXM 2 -> APIC 18 -> Node 1
SRAT: PXM 1 -> APIC 52 -> Node 0
SRAT: PXM 2 -> APIC 20 -> Node 1
SRAT: PXM 1 -> APIC 33 -> Node 0
SRAT: PXM 2 -> APIC 1 -> Node 1
SRAT: PXM 1 -> APIC 35 -> Node 0
SRAT: PXM 2 -> APIC 3 -> Node 1
SRAT: PXM 1 -> APIC 51 -> Node 0
SRAT: PXM 2 -> APIC 19 -> Node 1
SRAT: PXM 1 -> APIC 53 -> Node 0
SRAT: PXM 2 -> APIC 21 -> Node 1
SRAT: Node 1 PXM 2 0-d0000000
SRAT: Node 1 PXM 2 100000000-230000000
SRAT: Node 0 PXM 1 230000000-430000000
NUMA: Allocated memnodemap from b000 - b0c0
NUMA: Using 28 for the hash shift.
Bootmem setup node 0 0000000230000000-0000000430000000
NODE_DATA [0000000230000000 - 0000000230004fff]
bootmap [0000000230005000 - 0000000230044fff] pages 40
(9 early reservations) ==> bootmem [0230000000 - 0430000000]
#0 [0000000000 - 0000001000] BIOS data page
#1 [0000006000 - 0000008000] TRAMPOLINE
#2 [0001000000 - 0001a35ac4] TEXT DATA BSS
#3 [00377f3000 - 0037fef3bd] RAMDISK
#4 [000009e800 - 0000100000] BIOS reserved
#5 [0001a36000 - 0001a364fd] BRK
#6 [0000008000 - 000000a000] PGTABLE
#7 [000000a000 - 000000b000] PGTABLE
#8 [000000b000 - 000000b0c0] MEMNODEMAP
Bootmem setup node 1 0000000000000000-0000000230000000
NODE_DATA [000000000000b0c0 - 00000000000100bf]
bootmap [0000000000011000 - 0000000000056fff] pages 46
(9 early reservations) ==> bootmem [0000000000 - 0230000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001a35ac4] TEXT DATA BSS ==> [0001000000 - 0001a35ac4]
#3 [00377f3000 - 0037fef3bd] RAMDISK ==> [00377f3000 - 0037fef3bd]
#4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000]
#5 [0001a36000 - 0001a364fd] BRK ==> [0001a36000 - 0001a364fd]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
#8 [000000b000 - 000000b0c0] MEMNODEMAP ==> [000000b000 - 000000b0c0]
found SMP MP-table at [ffff8800000fe710] fe710
[ffffea0007a80000-ffffea0007bfffff] potential offnode page_structs
[ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 1
[ffffea0007c00000-ffffea000ebfffff] PMD -> [ffff880230200000-ffff8802371fffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00430000
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
1: 0x00000000 -> 0x00000001
1: 0x00000006 -> 0x000000a0
1: 0x00000100 -> 0x000cf679
1: 0x00100000 -> 0x00230000
0: 0x00230000 -> 0x00430000
On node 0 totalpages: 2097152
Normal zone: 28672 pages used for memmap
Normal zone: 2068480 pages, LIFO batch:31
On node 1 totalpages: 2094612
DMA zone: 56 pages used for memmap
DMA zone: 103 pages reserved
DMA zone: 3836 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 831153 pages, LIFO batch:31
Normal zone: 17024 pages used for memmap
Normal zone: 1228160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x32] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x34] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x21] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x23] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x33] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x35] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 32 CPUs, 16 hotplug CPUs
nr_irqs_gsi: 56
PM: Registered nosave memory: 0000000000001000 - 0000000000006000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000cf679000 - 00000000cf68f000
PM: Registered nosave memory: 00000000cf68f000 - 00000000cf6ce000
PM: Registered nosave memory: 00000000cf6ce000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000
PM: Registered nosave memory: 00000000fe000000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:32 nr_node_ids:2
PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91608 r8192 d23080 u131072
pcpu-alloc: s91608 r8192 d23080 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 02 04 06 08 10 12 14 16 18 20 22 24 26 28 30
pcpu-alloc: [1] 01 03 05 07 09 11 13 15 17 19 21 23 25 27 29 31
Built 2 zonelists in Zone order, mobility grouping on. Total pages: 4131629
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Initializing CPU#0
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 16446740k/17563648k available (5436k kernel code, 796592k absent, 320316k reserved, 2982k data, 884k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=2
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:1208
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 167772160 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2394.347 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.69 BogoMIPS (lpj=23943470)
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 0/0x20 -> Node 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
using mwait in idle threads.
Performance Events: Westmere events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22567 entries in 89 pages
Setting APIC routing to physical flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
Booting processor 1 APIC 0x0 ip 0x6000
Initializing CPU#1
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 1/0x0 -> Node 1
CPU1: Thermal monitoring enabled (TM1)
CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
CPU1: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x22 ip 0x6000
Initializing CPU#2
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 2/0x22 -> Node 0
CPU2: Thermal monitoring enabled (TM1)
CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU2: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x2 ip 0x6000
Initializing CPU#3
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 3/0x2 -> Node 1
CPU3: Thermal monitoring enabled (TM1)
CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU3: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Booting processor 4 APIC 0x32 ip 0x6000
Initializing CPU#4
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 9
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 4/0x32 -> Node 0
CPU4: Thermal monitoring enabled (TM1)
CPU 4 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU4: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#4]: passed.
Booting processor 5 APIC 0x12 ip 0x6000
Initializing CPU#5
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 9
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 5/0x12 -> Node 1
CPU5: Thermal monitoring enabled (TM1)
CPU 5 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU5: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#5]: passed.
Booting processor 6 APIC 0x34 ip 0x6000
Initializing CPU#6
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 10
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 6/0x34 -> Node 0
CPU6: Thermal monitoring enabled (TM1)
CPU 6 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU6: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#6]: passed.
Booting processor 7 APIC 0x14 ip 0x6000
Initializing CPU#7
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 10
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 7/0x14 -> Node 1
CPU7: Thermal monitoring enabled (TM1)
CPU 7 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
CPU7: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#7]: passed.
Booting processor 8 APIC 0x21 ip 0x6000
Initializing CPU#8
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 8/0x21 -> Node 0
CPU8: Thermal monitoring enabled (TM1)
CPU 8 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU8: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#8]: passed.
Booting processor 9 APIC 0x1 ip 0x6000
Initializing CPU#9
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 9/0x1 -> Node 1
CPU9: Thermal monitoring enabled (TM1)
CPU 9 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU9: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#9]: passed.
Booting processor 10 APIC 0x23 ip 0x6000
Initializing CPU#10
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 10/0x23 -> Node 0
CPU10: Thermal monitoring enabled (TM1)
CPU 10 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU10: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#10]: passed.
Booting processor 11 APIC 0x3 ip 0x6000
Initializing CPU#11
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 11/0x3 -> Node 1
CPU11: Thermal monitoring enabled (TM1)
CPU 11 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU11: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#11]: passed.
Booting processor 12 APIC 0x33 ip 0x6000
Initializing CPU#12
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 9
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 12/0x33 -> Node 0
CPU12: Thermal monitoring enabled (TM1)
CPU 12 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU12: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#12]: passed.
Booting processor 13 APIC 0x13 ip 0x6000
Initializing CPU#13
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 9
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 13/0x13 -> Node 1
CPU13: Thermal monitoring enabled (TM1)
CPU 13 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU13: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#13]: passed.
Booting processor 14 APIC 0x35 ip 0x6000
Initializing CPU#14
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 10
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 14/0x35 -> Node 0
CPU14: Thermal monitoring enabled (TM1)
CPU 14 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU14: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#14]: passed.
Booting processor 15 APIC 0x15 ip 0x6000
Initializing CPU#15
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 10
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 12288K
CPU 15/0x15 -> Node 1
CPU15: Thermal monitoring enabled (TM1)
CPU 15 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8
CPU15: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#15]: passed.
Brought up 16 CPUs
Total of 16 processors activated (76609.32 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0,8 level SIBLING
groups: 0 (cpu_power = 589) 8 (cpu_power = 589)
domain 1: span 0,2,4,6,8,10,12,14 level MC
groups: 0,8 (cpu_power = 1178) 2,10 (cpu_power = 1178) 4,12 (cpu_power = 1178) 6,14 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
CPU1 attaching sched-domain:
domain 0: span 1,9 level SIBLING
groups: 1 (cpu_power = 589) 9 (cpu_power = 589)
domain 1: span 1,3,5,7,9,11,13,15 level MC
groups: 1,9 (cpu_power = 1178) 3,11 (cpu_power = 1178) 5,13 (cpu_power = 1178) 7,15 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 1,3,5,7,9,11,13,15 (cpu_power = 4712) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
CPU2 attaching sched-domain:
domain 0: span 2,10 level SIBLING
groups: 2 (cpu_power = 589) 10 (cpu_power = 589)
domain 1: span 0,2,4,6,8,10,12,14 level MC
groups: 2,10 (cpu_power = 1178) 4,12 (cpu_power = 1178) 6,14 (cpu_power = 1178) 0,8 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
CPU3 attaching sched-domain:
domain 0: span 3,11 level SIBLING
groups: 3 (cpu_power = 589) 11 (cpu_power = 589)
domain 1: span 1,3,5,7,9,11,13,15 level MC
groups: 3,11 (cpu_power = 1178) 5,13 (cpu_power = 1178) 7,15 (cpu_power = 1178) 1,9 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 1,3,5,7,9,11,13,15 (cpu_power = 4712) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
CPU4 attaching sched-domain:
domain 0: span 4,12 level SIBLING
groups: 4 (cpu_power = 589) 12 (cpu_power = 589)
domain 1: span 0,2,4,6,8,10,12,14 level MC
groups: 4,12 (cpu_power = 1178) 6,14 (cpu_power = 1178) 0,8 (cpu_power = 1178) 2,10 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
CPU5 attaching sched-domain:
domain 0: span 5,13 level SIBLING
groups: 5 (cpu_power = 589) 13 (cpu_power = 589)
domain 1: span 1,3,5,7,9,11,13,15 level MC
groups: 5,13 (cpu_power = 1178) 7,15 (cpu_power = 1178) 1,9 (cpu_power = 1178) 3,11 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 1,3,5,7,9,11,13,15 (cpu_power = 4712) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
CPU6 attaching sched-domain:
domain 0: span 6,14 level SIBLING
groups: 6 (cpu_power = 589) 14 (cpu_power = 589)
domain 1: span 0,2,4,6,8,10,12,14 level MC
groups: 6,14 (cpu_power = 1178) 0,8 (cpu_power = 1178) 2,10 (cpu_power = 1178) 4,12 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
CPU7 attaching sched-domain:
domain 0: span 7,15 level SIBLING
groups: 7 (cpu_power = 589) 15 (cpu_power = 589)
domain 1: span 1,3,5,7,9,11,13,15 level MC
groups: 7,15 (cpu_power = 1178) 1,9 (cpu_power = 1178) 3,11 (cpu_power = 1178) 5,13 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 1,3,5,7,9,11,13,15 (cpu_power = 4712) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
CPU8 attaching sched-domain:
domain 0: span 0,8 level SIBLING
groups: 8 (cpu_power = 589) 0 (cpu_power = 589)
domain 1: span 0,2,4,6,8,10,12,14 level MC
groups: 0,8 (cpu_power = 1178) 2,10 (cpu_power = 1178) 4,12 (cpu_power = 1178) 6,14 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
CPU9 attaching sched-domain:
domain 0: span 1,9 level SIBLING
groups: 9 (cpu_power = 589) 1 (cpu_power = 589)
domain 1: span 1,3,5,7,9,11,13,15 level MC
groups: 1,9 (cpu_power = 1178) 3,11 (cpu_power = 1178) 5,13 (cpu_power = 1178) 7,15 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 1,3,5,7,9,11,13,15 (cpu_power = 4712) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
CPU10 attaching sched-domain:
domain 0: span 2,10 level SIBLING
groups: 10 (cpu_power = 589) 2 (cpu_power = 589)
domain 1: span 0,2,4,6,8,10,12,14 level MC
groups: 2,10 (cpu_power = 1178) 4,12 (cpu_power = 1178) 6,14 (cpu_power = 1178) 0,8 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
CPU11 attaching sched-domain:
domain 0: span 3,11 level SIBLING
groups: 11 (cpu_power = 589) 3 (cpu_power = 589)
domain 1: span 1,3,5,7,9,11,13,15 level MC
groups: 3,11 (cpu_power = 1178) 5,13 (cpu_power = 1178) 7,15 (cpu_power = 1178) 1,9 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 1,3,5,7,9,11,13,15 (cpu_power = 4712) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
CPU12 attaching sched-domain:
domain 0: span 4,12 level SIBLING
groups: 12 (cpu_power = 589) 4 (cpu_power = 589)
domain 1: span 0,2,4,6,8,10,12,14 level MC
groups: 4,12 (cpu_power = 1178) 6,14 (cpu_power = 1178) 0,8 (cpu_power = 1178) 2,10 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
CPU13 attaching sched-domain:
domain 0: span 5,13 level SIBLING
groups: 13 (cpu_power = 589) 5 (cpu_power = 589)
domain 1: span 1,3,5,7,9,11,13,15 level MC
groups: 5,13 (cpu_power = 1178) 7,15 (cpu_power = 1178) 1,9 (cpu_power = 1178) 3,11 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 1,3,5,7,9,11,13,15 (cpu_power = 4712) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
CPU14 attaching sched-domain:
domain 0: span 6,14 level SIBLING
groups: 14 (cpu_power = 589) 6 (cpu_power = 589)
domain 1: span 0,2,4,6,8,10,12,14 level MC
groups: 6,14 (cpu_power = 1178) 0,8 (cpu_power = 1178) 2,10 (cpu_power = 1178) 4,12 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 0,2,4,6,8,10,12,14 (cpu_power = 4712) 1,3,5,7,9,11,13,15 (cpu_power = 4712)
CPU15 attaching sched-domain:
domain 0: span 7,15 level SIBLING
groups: 15 (cpu_power = 589) 7 (cpu_power = 589)
domain 1: span 1,3,5,7,9,11,13,15 level MC
groups: 7,15 (cpu_power = 1178) 1,9 (cpu_power = 1178) 3,11 (cpu_power = 1178) 5,13 (cpu_power = 1178)
domain 2: span 0-15 level NODE
groups: 1,3,5,7,9,11,13,15 (cpu_power = 4712) 0,2,4,6,8,10,12,14 (cpu_power = 4712)
devtmpfs: initialized
regulator: core version 0.5
Time: 11:50:38 Date: 02/14/12
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
Trying to unpack rootfs image as initramfs...
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0xec40-0xec5f]
pci 0000:00:1a.1: reg 20 io port: [0xec60-0xec7f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xdf0ff800-0xdf0ffbff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xec80-0xec9f]
pci 0000:00:1d.1: reg 20 io port: [0xeca0-0xecbf]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xdf0ffc00-0xdf0fffff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0 (mask 000f)
pci 0000:00:1f.2: reg 10 io port: [0xec10-0xec17]
pci 0000:00:1f.2: reg 14 io port: [0xec08-0xec0b]
pci 0000:00:1f.2: reg 18 io port: [0xec18-0xec1f]
pci 0000:00:1f.2: reg 1c io port: [0xec0c-0xec0f]
pci 0000:00:1f.2: reg 20 io port: [0xec20-0xec2f]
pci 0000:00:1f.2: reg 24 io port: [0xec30-0xec3f]
pci 0000:01:00.0: reg 10 64bit mmio: [0xd6000000-0xd7ffffff]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:01:00.1: reg 10 64bit mmio: [0xd8000000-0xd9ffffff]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: PME# disabled
pci 0000:00:01.0: bridge 32bit mmio: [0xd6000000-0xd9ffffff]
pci 0000:02:00.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10 64bit mmio: [0xdc000000-0xddffffff]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:00:03.0: bridge 32bit mmio: [0xda000000-0xddffffff]
pci 0000:03:00.0: reg 10 io port: [0xfc00-0xfcff]
pci 0000:03:00.0: reg 14 64bit mmio: [0xdf2b0000-0xdf2bffff]
pci 0000:03:00.0: reg 1c 64bit mmio: [0xdf2c0000-0xdf2fffff]
pci 0000:03:00.0: reg 30 32bit mmio pref: [0xdf100000-0xdf1fffff]
pci 0000:03:00.0: supports D1 D2
pci 0000:00:1c.0: bridge io port: [0xf000-0xffff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xdf100000-0xdf2fffff]
pci 0000:06:03.0: reg 10 32bit mmio pref: [0xd5800000-0xd5ffffff]
pci 0000:06:03.0: reg 14 32bit mmio: [0xde7fc000-0xde7fffff]
pci 0000:06:03.0: reg 18 32bit mmio: [0xde800000-0xdeffffff]
pci 0000:06:03.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xde000000-0xdeffffff]
pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd5800000-0xd5ffffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 *14 15)
vgaarb: device added: PCI:0000:06:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x880-0x8ff has been reserved
system 00:07: ioport range 0x900-0x91f has been reserved
system 00:07: ioport range 0x920-0x923 has been reserved
system 00:07: ioport range 0x924-0x924 has been reserved
system 00:07: ioport range 0xc00-0xc7f has been reserved
system 00:07: ioport range 0xca0-0xca7 has been reserved
system 00:07: ioport range 0xca9-0xcab has been reserved
system 00:07: ioport range 0xcad-0xcaf has been reserved
system 00:08: ioport range 0xca8-0xca8 has been reserved
system 00:08: ioport range 0xcac-0xcac has been reserved
system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0c: iomem range 0xfed90000-0xfed91fff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xd6000000-0xd9ffffff
pci 0000:00:01.0: PREFETCH window: disabled
pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
pci 0000:00:03.0: IO window: disabled
pci 0000:00:03.0: MEM window: 0xda000000-0xddffffff
pci 0000:00:03.0: PREFETCH window: disabled
pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
pci 0000:00:07.0: IO window: disabled
pci 0000:00:07.0: MEM window: disabled
pci 0000:00:07.0: PREFETCH window: disabled
pci 0000:00:09.0: PCI bridge, secondary bus 0000:05
pci 0000:00:09.0: IO window: disabled
pci 0000:00:09.0: MEM window: disabled
pci 0000:00:09.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.0: IO window: 0xf000-0xffff
pci 0000:00:1c.0: MEM window: 0xdf100000-0xdf2fffff
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: 0xde000000-0xdeffffff
pci 0000:00:1e.0: PREFETCH window: 0x000000d5800000-0x000000d5ffffff
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:09.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
pci 0000:00:09.0: setting latency timer to 64
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 1 mem: [0xd6000000-0xd9ffffff]
pci_bus 0000:02: resource 1 mem: [0xda000000-0xddffffff]
pci_bus 0000:03: resource 0 io: [0xf000-0xffff]
pci_bus 0000:03: resource 1 mem: [0xdf100000-0xdf2fffff]
pci_bus 0000:06: resource 1 mem: [0xde000000-0xdeffffff]
pci_bus 0000:06: resource 2 pref mem [0xd5800000-0xd5ffffff]
pci_bus 0000:06: resource 3 io: [0x00-0xffff]
pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:06:03.0: Boot video device
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1329220237.740:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.13)
msgmni has been set to 32122
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
alloc irq_desc for 56 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 56 for MSI/MSI-X
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 57 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:03.0: irq 57 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 58 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:07.0: irq 58 for MSI/MSI-X
pcieport 0000:00:07.0: setting latency timer to 64
alloc irq_desc for 59 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:09.0: irq 59 for MSI/MSI-X
pcieport 0000:00:09.0: setting latency timer to 64
alloc irq_desc for 60 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 60 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
aer 0000:00:07.0:pcie02: service driver aer loaded
aer 0000:00:09.0:pcie02: service driver aer loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-3 state
processor LNXCPU:00: registered as cooling_device0
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
processor LNXCPU:04: registered as cooling_device4
processor LNXCPU:05: registered as cooling_device5
processor LNXCPU:06: registered as cooling_device6
processor LNXCPU:07: registered as cooling_device7
processor LNXCPU:08: registered as cooling_device8
processor LNXCPU:09: registered as cooling_device9
processor LNXCPU:0a: registered as cooling_device10
processor LNXCPU:0b: registered as cooling_device11
processor LNXCPU:0c: registered as cooling_device12
processor LNXCPU:0d: registered as cooling_device13
processor LNXCPU:0e: registered as cooling_device14
processor LNXCPU:0f: registered as cooling_device15
Linux agpgart interface v0.103
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
ata_piix 0000:00:1f.2: version 2.13
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
ata_piix 0000:00:1f.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
Freeing initrd memory: 8176k freed
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xec10 ctl 0xec08 bmdma 0xec20 irq 23
ata2: SATA max UDMA/133 cmd 0xec18 ctl 0xec0c bmdma 0xec28 irq 23
Fixed MDIO Bus: probed
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf0ff800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdf0ffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000ec40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000ec60
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ec80
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
alloc irq_desc for 20 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000eca0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.1.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 0:978:832
rtc_cmos 00:04: setting system clock to 2012-02-14 11:50:38 UTC (1329220238)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
usb 1-3: new high speed USB device using ehci_hcd and address 2
usb 1-3: configuration #1 chosen from 1 choice
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 3 ports detected
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATAPI: TEAC DVD-ROM DV-28SW, R.2A, max UDMA/100
ata1.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM TEAC DVD-ROM DV-28SW R.2A PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
usb 5-2: new full speed USB device using uhci_hcd and address 2
usb 5-2: configuration #1 chosen from 1 choice
ata2: failed to resume link (SControl 0)
ata2: SATA link down (SStatus 4 SControl 0)
Freeing unused kernel memory: 884k freed
Write protecting the kernel read-only data: 7716k
udev: starting version 151
usbcore: registered new interface driver hiddev
mpt2sas version 02.100.03.00 loaded
scsi2 : Fusion MPT SAS Host
mpt2sas 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
mpt2sas 0000:03:00.0: setting latency timer to 64
mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (16455804 kB)
alloc irq_desc for 61 on node -1
alloc kstat_irqs on node -1
mpt2sas 0000:03:00.0: irq 61 for MSI/MSI-X
mpt2sas0: PCI-MSI-X enabled: IRQ 61
mpt2sas0: iomem(0xdf2b0000), mapped(0xffffc90012660000), size(65536)
mpt2sas0: ioport(0xfc00), size(256)
mpt2sas0: sending diag reset !!
input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input2
generic-usb 0003:0624:0248.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input0
input: Avocent USB Composite Device-0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input3
generic-usb 0003:0624:0248.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent USB Composite Device-0] on usb-0000:00:1d.0-2/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
mpt2sas0: diag reset: SUCCESS
mpt2sas0: Allocated physical memory: size(1091 kB)
mpt2sas0: Current Controller Queue Depth(467), Max Controller Queue Depth(3439)
mpt2sas0: Scatter Gather Elements per IO(128)
mpt2sas0: LSISAS2008: FWVersion(02.15.59.00), ChipRevision(0x02), BiosVersion(07.01.08.00)
mpt2sas0: Dell PERC H200 Integrated: Vendor(0x1000), Device(0x0072), SSVID(0x1028), SSDID(0x1F1E)
mpt2sas0: Protocol=(Initiator,Target), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
mpt2sas0: sending port enable !!
mpt2sas0: host_add: handle(0x0001), sas_addr(0x50026b905efef200), phys(8)
mpt2sas0: port enable: SUCCESS
scsi 2:0:0:0: Direct-Access SEAGATE ST9146803SS FS62 PQ: 0 ANSI: 5
scsi 2:0:0:0: SSP: handle(0x000a), sas_addr(0x5000c50023138665), device_name(0x00c5005064861323)
scsi 2:0:0:0: SSP: enclosure_logical_id(0x50026b905efef200), slot(0)
scsi 2:0:0:0: qdepth(254), tagged(1), simple(1), ordered(0), scsi_level(6), cmd_que(1)
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] 286749480 512-byte logical blocks: (146 GB/136 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: bb 00 10 08
sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
sda: sda1 sda2 < sda5 >
sd 2:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda5): mounted filesystem with ordered data mode
Adding 15998968k swap on /dev/sda1. Priority:-1 extents:1 across:15998968k
udev: starting version 151
ACPI Error: SMBus or IPMI write requires Buffer of length 42, found length 20 (20090903/exfield-286)
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._GHL] (Node ffff88042fc1ec60), AE_AML_BUFFER_LIMIT
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PMI0._PMC] (Node ffff88042fc1ebe0), AE_AML_BUFFER_LIMIT
ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMC (20090903/power_meter-772)
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
type=1505 audit(1329220254.628:2): operation="profile_load" pid=647 name="/sbin/dhclient3"
type=1505 audit(1329220254.628:3): operation="profile_load" pid=647 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1505 audit(1329220254.628:4): operation="profile_load" pid=647 name="/usr/lib/connman/scripts/dhclient-script"
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009)
alloc irq_desc for 36 on node -1
alloc kstat_irqs on node -1
bnx2 0000:01:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
bnx2 0000:01:00.0: setting latency timer to 64
bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
bnx2 0000:01:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
vga16fb: initializing
vga16fb: mapped to 0xffff8800000a0000
fb0: VGA16 VGA frame buffer device
eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d6000000, IRQ 36, node addr 00:22:19:6d:07:b3
alloc irq_desc for 48 on node -1
alloc kstat_irqs on node -1
bnx2 0000:01:00.1: PCI INT B -> GSI 48 (level, low) -> IRQ 48
bnx2 0000:01:00.1: setting latency timer to 64
bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
bnx2 0000:01:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem d8000000, IRQ 48, node addr 00:22:19:6d:07:b5
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
bnx2 0000:02:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
bnx2 0000:02:00.0: setting latency timer to 64
bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
bnx2 0000:02:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem da000000, IRQ 32, node addr 00:22:19:6d:07:b7
alloc irq_desc for 42 on node -1
alloc kstat_irqs on node -1
bnx2 0000:02:00.1: PCI INT B -> GSI 42 (level, low) -> IRQ 42
bnx2 0000:02:00.1: setting latency timer to 64
bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw
bnx2 0000:02:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw
eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem dc000000, IRQ 42, node addr 00:22:19:6d:07:b9
dell-wmi: No known WMI GUID found
Console: switching to colour frame buffer device 80x30
lp: driver loaded but no devices found
alloc irq_desc for 62 on node -1
alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 62 for MSI/MSI-X
alloc irq_desc for 63 on node -1
alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 63 for MSI/MSI-X
alloc irq_desc for 64 on node -1
alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 64 for MSI/MSI-X
alloc irq_desc for 65 on node -1
alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 65 for MSI/MSI-X
alloc irq_desc for 66 on node -1
alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 66 for MSI/MSI-X
alloc irq_desc for 67 on node -1
alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 67 for MSI/MSI-X
alloc irq_desc for 68 on node -1
alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 68 for MSI/MSI-X
alloc irq_desc for 69 on node -1
alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 69 for MSI/MSI-X
alloc irq_desc for 70 on node -1
alloc kstat_irqs on node -1
bnx2 0000:01:00.0: irq 70 for MSI/MSI-X
bnx2: eth0: using MSIX
ADDRCONF(NETDEV_UP): eth0: link is not ready
type=1505 audit(1329220255.989:5): operation="profile_replace" pid=913 name="/sbin/dhclient3"
type=1505 audit(1329220255.989:6): operation="profile_replace" pid=913 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1505 audit(1329220255.989:7): operation="profile_replace" pid=913 name="/usr/lib/connman/scripts/dhclient-script"
type=1505 audit(1329220256.049:8): operation="profile_load" pid=914 name="/usr/sbin/tcpdump"
bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NFS: server 138.251.198.22 error: fileid changed
fsid 0:15: expected fileid 0x2e0003, got 0x2e0001
type=1505 audit(1330610550.512:9): operation="profile_load" pid=14788 name="/usr/sbin/libvirtd"
type=1505 audit(1330610554.102:10): operation="profile_load" pid=14837 name="/usr/lib/libvirt/virt-aa-helper"
Bridge firewalling registered
virbr0: starting userspace STP failed, starting kernel STP
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
virbr0: no IPv6 routers present
device eth0 entered promiscuous mode
br0: port 1(eth0) entering learning state
br0: port 1(eth0) entering forwarding state
br0: no IPv6 routers present
udev: starting version 151
EXT4-fs (loop1): mounted filesystem with ordered data mode
ioctl32(grub:5396): Unknown cmd fd(5) cmd(00001260){t:12;sz:0} arg(f7290b14) on /tmp/vmbuilder-grub/tmpoXuRlI
ioctl32(grub:5396): Unknown cmd fd(5) cmd(00001261){t:12;sz:0} arg(00000000) on /tmp/vmbuilder-grub/tmpoXuRlI
ioctl32(grub:5396): Unknown cmd fd(5) cmd(00001261){t:12;sz:0} arg(00000000) on /tmp/vmbuilder-grub/tmpoXuRlI
ioctl32(grub:5396): Unknown cmd fd(5) cmd(00001261){t:12;sz:0} arg(00000000) on /tmp/vmbuilder-grub/tmpoXuRlI
ioctl32(grub:5396): Unknown cmd fd(5) cmd(00001261){t:12;sz:0} arg(00000000) on /tmp/vmbuilder-grub/tmpoXuRlI
type=1505 audit(1330960279.937:11): operation="profile_load" pid=28210 name="libvirt-3b66f63a-5f1d-c871-cf8a-4d3a93b4f9b0"
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entering learning state
br0: port 2(vnet0) entering forwarding state
vnet0: no IPv6 routers present
type=1505 audit(1330960317.497:12): operation="profile_remove" pid=29737 name="libvirt-3b66f63a-5f1d-c871-cf8a-4d3a93b4f9b0" namespace="root"
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
udev: starting version 151
EXT4-fs (loop1): mounted filesystem with ordered data mode
ioctl32(grub:5940): Unknown cmd fd(5) cmd(00001260){t:12;sz:0} arg(f7411b14) on /tmp/vmbuilder-grub/tmpgYZjEp
ioctl32(grub:5940): Unknown cmd fd(5) cmd(00001261){t:12;sz:0} arg(00000000) on /tmp/vmbuilder-grub/tmpgYZjEp
ioctl32(grub:5940): Unknown cmd fd(5) cmd(00001261){t:12;sz:0} arg(00000000) on /tmp/vmbuilder-grub/tmpgYZjEp
ioctl32(grub:5940): Unknown cmd fd(5) cmd(00001261){t:12;sz:0} arg(00000000) on /tmp/vmbuilder-grub/tmpgYZjEp
ioctl32(grub:5940): Unknown cmd fd(5) cmd(00001261){t:12;sz:0} arg(00000000) on /tmp/vmbuilder-grub/tmpgYZjEp
type=1505 audit(1330961143.477:13): operation="profile_load" pid=28210 name="libvirt-0b83cb3d-0373-3818-21bf-21b7368b2420"
device vnet0 entered promiscuous mode
virbr0: topology change detected, propagating
virbr0: port 1(vnet0) entering forwarding state
vnet0: no IPv6 routers present
type=1505 audit(1330961222.137:14): operation="profile_remove" pid=30270 name="libvirt-0b83cb3d-0373-3818-21bf-21b7368b2420" namespace="root"
virbr0: port 1(vnet0) entering disabled state
device vnet0 left promiscuous mode
virbr0: port 1(vnet0) entering disabled state
type=1505 audit(1330961223.637:15): operation="profile_load" pid=30420 name="libvirt-0b83cb3d-0373-3818-21bf-21b7368b2420"
device vnet0 entered promiscuous mode
virbr0: topology change detected, propagating
virbr0: port 1(vnet0) entering forwarding state
vnet0: no IPv6 routers present
type=1505 audit(1330962046.997:16): operation="profile_remove" pid=1966 name="libvirt-0b83cb3d-0373-3818-21bf-21b7368b2420" namespace="root"
virbr0: port 1(vnet0) entering disabled state
device vnet0 left promiscuous mode
virbr0: port 1(vnet0) entering disabled state
type=1505 audit(1330962086.437:17): operation="profile_load" pid=3144 name="libvirt-0b83cb3d-0373-3818-21bf-21b7368b2420"
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entering learning state
br0: port 2(vnet0) entering forwarding state
vnet0: no IPv6 routers present
type=1505 audit(1330962177.667:18): operation="profile_remove" pid=5133 name="libvirt-0b83cb3d-0373-3818-21bf-21b7368b2420" namespace="root"
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
type=1505 audit(1330962180.017:19): operation="profile_load" pid=5222 name="libvirt-0b83cb3d-0373-3818-21bf-21b7368b2420"
device vnet0 entered promiscuous mode
br0: port 2(vnet0) entering learning state
br0: port 2(vnet0) entering forwarding state
vnet0: no IPv6 routers present
udev: starting version 151
udev: starting version 151
usb 1-3.1: new low speed USB device using ehci_hcd and address 3
usb 1-3.1: configuration #1 chosen from 1 choice
input: USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.1/1-3.1:1.0/input/input4
generic-usb 0003:09DA:0260.0003: input,hidraw2: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1a.7-3.1/input0
input: USB Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3.1/1-3.1:1.1/input/input5
generic-usb 0003:09DA:0260.0004: input,hidraw3: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1a.7-3.1/input1
usb 1-3.1: USB disconnect, address 3
sd 2:0:0:0: Queue depth reduced to (121)
hrtimer: interrupt took 11345 ns
NOHZ: local_softirq_pending 100
type=1505 audit(1335104654.827:20): operation="profile_replace" pid=10056 name="/usr/sbin/libvirtd"
type=1505 audit(1335104658.467:21): operation="profile_replace" pid=10101 name="/usr/lib/libvirt/virt-aa-helper"
type=1505 audit(1335104777.889:22): operation="profile_remove" pid=10749 name="libvirt-0b83cb3d-0373-3818-21bf-21b7368b2420" namespace="root"
br0: port 2(vnet0) entering disabled state
device vnet0 left promiscuous mode
br0: port 2(vnet0) entering disabled state
type=1505 audit(1335304775.907:23): operation="profile_load" pid=23890 name="/usr/sbin/mysqld"
type=1505 audit(1335304775.977:24): operation="profile_replace" pid=23895 name="/usr/sbin/mysqld"